Laser Chiller Service
It is imperative that the chiller and laser cutter are maintained to the highest standard to allow seamless operation. We know how much laser cutters cost and how much you want to be back in production. We will get you up and running- fast!
Laser chillers are a niche within the chiller industry. The chillers responsible for cooling laser cutters are close control to keep the oscillator and the mirrors at a specific temperature. Therefore, the chiller quite often has 2 tanks with a set point for each tank. If the chiller starts to fail, the laser cutter will shut down to protect itself
The controller for the laser chiller is quite complex so as to fulfil the requirements of the laser cutter. It can be bought pre-programmed from the chiller manufacturer and the parameters can be adjusted to suit the particular conditions on-site and the specific application of the laser cutter. This allows a swift repair with minimum down time
What We Offer
Nationwide and international service
Fast, same day parts
Better service... less cost
A steel precision engineering factory called us in to investigate a low pressure problem in Gloucester. We found the liquid line solenoid to have jammed partly closed. We offer same day delivery of parts and refrigerant so the engineer got the gas out while waiting for the delivery. This maximizes how much work can get done in a day as the engineer is not driving round the suppliers. The part arrived, was soldered on, pressure tested, vacced and re-charged. The factory went back into production, catching up on orders
Why Choose Us?
We think you should choose us as we have a lot of experience in the servicing of laser chillers. In other words- we know what we are doing. When you have a breakdown: it'll be diagnosed correctly and the parts ordered same day!
Schedule a site visit today!